(Based on [http://llama.med.harvard.edu/~fgibbons/PerlPythonPhrasebook.html an original] by the late Jak Kirman.)

TableOfContents

Introduction

This phrasebook contains a collection of idioms, various ways of accomplishing common tasks, tricks and useful things to know, in Perl and Python side-by-side. I hope this will be useful for people switching from Perl to Python, and for people deciding which to choose. The first part of the phrasebook is based on Tom Christiansen's [http://www.perl.com/perl/pdsc/ Perl Data Structures Cookbook].

I have only been working on this for a short time, so many of the translations could probably be improved, and the format could be greatly cleaned up.

I will get the data-structures cookbook translated first and then go back to clean up the code. Also, since I have been using Python for far less time than Perl, there are certainly idioms I don't know or that I will misuse. Please feel free to fix and update.

--

Other references: [http://pleac.sourceforge.net/ PLEAC].

--

Thanks to David Ascher, Guido van Rossum, Tom Christiansen, Larry Wall and Eric Daniel for helpful comments.

--

TODO:

• break up into multiple smaller pages
• use modern Python idioms
• use modern Perl idioms
• add more points of comparison
• Use sorted() where appropriate once 2.4 has been out a while.
• Get rid of map() where possible.
• Simple types (strings, lists, dictionaries, etc.)
• Common tasks (reading from a file, exception handling, splitting strings, regular expression manipulation, etc.)
• Sections 4 and 5 of the Perl Data Structures Cookbook.
• Vertical whitespace needs fixing.

QUESTIONS:

• Should function and data structure names for python code be in python_style (and more appropriate/informative)?

The obvious

Python don't need no steenking semicolons.

The not so obvious

There are many Integrated Development Environments, (IDEs), for Python that are usually recommended to new users and used by seasoned Python programmers alike. The Idle IDE is a TK based GUI providing language-aware editing, debugging and command line shell for Python that is part of the Python distribution. Many of the python examples shown can be experimented with in the Idle IDE.

Simple types

Strings

Creating a string

$s = 'a string';

s = 'a string'

Note that string variables in Perl are specified with a dollar sign; in Python you just specify the name of the variable.

Larry Wall points out:

• This is rather oversimplifying what is going on in both Perl and Python. The $ in Perl indicates a scalar variable, which may hold a string, a number, or a reference. There's no such thing as a string variable in Python, where variables may only hold references. You can program in a Pythonesque subset of Perl by restricting yourself to scalar variables and references. The main difference is that Perl doesn't do implicit dereferencing like Python does.

Quoting

$s1 = "some string";
$s2 = "a string with\ncontrol characters\n";
$s3 = 'a "quoted" string';
$s4 = "a 'quoted' string";
$s5 = qq/a string with '" both kinds of quotes/;
$s6 = "another string with '\" both kinds of quotes";
$s7 = 'a stri\ng that au\tomatically escapes backslashes';

for $i ($s1, $s2, $s3, $s4, $s5, $s6, $s7)
{
  print ("$i\n");
}

s1 = "some string"
s2 = "a string with\ncontrol characters\n"
s3 = 'a "quoted" string'
s4 = "a 'quoted' string"
s5 = '''a string with '" both kinds of quotes'''
s6 = "another string with '\" both kinds of quotes"
s7 = r"a stri\ng that au\tomatically escapes backslashes"

for i in (s1, s2, s3, s4, s5, s6, s7):
  print i

In both languages, strings can be single-quoted or double-quoted. In Python, there is no difference between the two except that in single- quoted strings double-quotes need not be escaped by doubling them, and vice versa. In Perl, double-quoted strings have control characters and variables interpolated inside them (see below) and single-quoted strings do not.

Both languages provide other quoting mechanisms; Python uses triple quotes (single or double, makes no difference) for multi-line strings; Python has the r prefix (r"" or r'' or r"""""" or r'''''') to indicate strings in which backslash is automatically escaped -- highly useful for regular expressions. Perl has very elaborate (and very useful) quoting mechanisms; see the operators q, qq, qw, qx, etc. in the PerlManual.

Quoting is definitely one of the areas where Perl excels.

Interpolation

$name = "Fred";
$header1 = "Dear $name,";
$title = "Dr.";
$header2 = "Dear $title $name,";

print "$header1\n$header2\n";

name = "Fred"
header1 = "Dear %s," % name
title = "Dr."
header2 = "Dear %(title)s %(name)s," % vars()

print header1
print header2

Perl's interpolation is much more convenient, though slightly less powerful than Python's % operator. Remember that in Perl variables are interpolated within double-quoted strings, but not single-quoted strings.

Perl has a function sprintf that behaves similarly to Python's % operator; the above lines could have been written:

$name = "Fred";
$header1 = sprintf ("Dear %s,", $name);
$title = "Dr.";
$header2 = sprintf ("Dear %s %s,", $name, $title);

Python's % (format) operator is generally the way to go when you have more than minimal string formatting to do (you can use + for concatenation, and [:] for slicing). It has three forms. In the first, there is a single % specifier in the string; the specifiers are roughly those of C's sprintf. The right-hand side of the format operator specifies the value to be used at that point:

x = 1.0/3.0
s = 'the value of x is roughly %.4f' % x

If you have several specifiers, you give the values in a list on the right hand side:

x = 1.0/3.0
y = 1.0/4.0
s = 'the value of x,y is roughly %.4f,%.4f' % (x, y)

Finally, you can give a name and a format specifier:

x = 1.0/3.0
y = 1.0/4.0
s = 'the value of x,y is roughly %(x).4f,%(y).4f' % vars()

The name in parentheses is used as a key into the dictionary you provide on the right-hand side; its value is formatted according to the specifier following the parentheses. Some useful dictionaries are locals() (the local symbol table), globals() (the global symbol table), and vars() (equivalent to locals() except when an argument is given, in which case it returns arg.__dict__).

[http://www.python.org/peps/pep-0215.html PEP215] proposes a $"$var" substitution mode as an alternative to "%(var)s" % locals(), but seems to be losing traction to the explicit Template class proposed in [http://www.python.org/peps/pep-0292.html PEP292], which requires no syntax changes.

Modifying a string

$s1 = "new string";        # change to new string
$s2 =~ s/\n/[newline]/g;   # substitute newlines with the text "[newline]"
substr($s2, 0, 3) = 'X';   # replace the first 3 chars with an X

print ("$s1\n$s2\n");

s1 = "new string"          # change to new string
                           # substitute newlines with the text "[newline]"
s2 = s2.replace("\n", "[newline]")
s2 = 'X' + s2[3:]

print s1
print s2

In Perl, strings are mutable; the third assignment modifies s2. In Python, strings are immutable, so you have to do this operation a little differently, by slicing the string into the appropriate pieces.

A Python string is just an array of characters, so all of the array operations are applicable to strings. In particular, if a is an array, a[x:y] is the slice of a from index x up to, but not including, index y. If x is omitted, the slice starts at the beginning of the array; if y is omitted, the slice ends at the last element. If either index is negative, the length of the array is added to it.

In Perl, slicing is performed by giving the array a list of indicies to be included in the slice. This list can be any arbitrary list and by using the range operator ..., you can get Python like slicing. If any of the indices in the list is out of bounds an undef is inserted there.

@array = ('zero', 'one', 'two', 'three', 'four')  

# slicing with range operator to generate slice index list
@slice = @array[0..2]  # returns ('zero', 'one', 'two')

# Using arbitary index lists
@slice = @array[0,3,2] # returns ('zero', 'three', 'two')
@slice = @array[0,9,1] # returns ('zero', undef, 'one')

Note: Perl range operator uses a closed interval.

Importing

use Module;

use Module (symbol1, symbol2, symbol3);
# or use Module qw(symbol1 symbol2 symbol3);

from module import symbol1, symbol2, symbol3

# Allows mysymbol.func()
from module import symbol1 as mysymbol

# Unless the module is specifically designed for this kind of import, don't use it
from module import *

I need to figure out the precise differences here. Roughly, from..import * and use Module mean import the entire namespace; the other versions import only selected names.

require Module;

Module::func();

import module

module.func()

This "loads" the specified module, executing any initialization code. It does not modify the namespace. In order to access symbols in the module, you have to explicitly qualify the name, as shown.

Common tasks

Reading a file as a list of lines

$filename = "cooktest1.1-1";
open (F, $filename) or die ("can't open $filename: $!\n");
@lines = <F>;

filename = "cooktest1.1-1"
try:
  f = open(filename)
except IOError:
  sys.stderr.write("can't open %s: %s %s\n" %
                                   (filename, sys.exc_type, sys.exc_value))
lines = f.readlines()

In Perl, variables are always preceded by a symbol that indicates their type. A $ indicates a simple type (number, string or reference), an @ indicates an array, a % indicates a hash (dictionary), and an & indicates a function.

In Python, objects must be initialized before they are used, and the initialization determines the type. For example, a = [] creates an empty array a, d = {} creates an empty dictionary.

looping over files given on the command line or stdin

The useful perl idiom of:

while (<>) {
    ...                 # code for each line
}

loops over each line of every file named on the commandline when executing the script; or, if no files are named, it will loop over every line of the standard input file descriptor.

The Python fileinput module does a similar task:

import fileinput
for line in fileinput.input():
    ...                 # code to process each line

The fileinput module also allows inplace editing or editing with the creation of a backup of the files, and a different list of files can be given insteaad of taking the command line arguments.

Some general comparisons

This section is under construction; for the moment I am just putting random notes here. I will organize them later.

• Perl's regular expressions are much more accessible than those of Python being embedded in Perl syntax in contrast to Pythons import of its re module.
• Perl's quoting mechanisms are more powerful than those of Python.
• I find Python's syntax much cleaner than Perl's

• I find Perl's syntax too flexible, leading to silent errors. The -w flag and use strict helps quite a bit, but still not as much as Python.

• I like Python's small core with a large number of standard libraries. Perl has a much larger core, and though many libraries are available, since they are not standard, it is often best to avoid them for portability.
• Python's object model is very uniform, allowing you, for example, to define types that can be used wherever a standard file object can be used.

• Python allows you to define operators for user-defined types. The operator overloading facility in Perl is provided as an add-on---the overload module.

Lists of lists

The perl code in this section is taken, with permission, almost directly from Tom Christiansen's [http://www.perl.com/perl/pdsc/ Perl Data Structures Cookbook], part 1, release 0.1, with a few typos fixed.

Lists of lists: preliminaries

sub printSep {   print ("=" x 60, "\n"); }

sub printLoL
{
  my ($s, $lol) = @_;
  print ("$s\n");
  for $l (@$lol)
  {
    print (join (" ", @$l));
    print ("\n");
  }
  printSep();
}

# which is longhand for:
sub printLoL {
        print $_[0] . "\n";
        print join(" ", @$_) . "\n" foreach (@{$_[1]});
        printSep();
}

# or even:
sub printLoL {
        print $_[0] . "\n", map(join(" ", @$_) . "\n" , @{$_[1]}), "=" x 60 . "\n";
}

# return numeric (or other) converted to string
sub somefunc {  my ($i) = shift;  "$i";  }

def printSep():
    print '=' * 60

def printLoL(s, lol):
    out = [s] + [" ".join(str(elem)) for elem in lol]
    print "\n".join(out)
    printSep()

def somefunc(i):
    return str(i)  # string representation of i

printLoL pretty-prints a list of lists.

printSep prints a line of equal signs as a separator.

somefunc is a function that is used in various places below.

Lost in the translation

In converting Perl examples so directly to Python, whilst initially useful, the casual browser should be aware that the task of printLoL is usually accomplished by just

  print lol

As Python can print default string representations of all objects.

An import of the pprint at the beginning of a module would then allow

  pprint(lol)

to substitute for all cases of printLol in a more 'pythonic' way. (pprint gives even more formatting options when printing data structures).

requires/imports

import sys

Perl's use is roughly equivalent to Python's import.

Perl has much more built in, so nothing here requires importing.

• "Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems." - Jamie Zawinski

For many simple operations, Perl will use a regular expression where Pythonic code won't. Should you really need to use regular expressions, import the re module.

Declaration of a list of lists

@LoL = (
       [ "fred", "barney" ],
       [ "george", "jane", "elroy" ],
       [ "homer", "marge", "bart" ],
     );
@LoLsave = @LoL; # for later

printLoL ('Families:', \@LoL);

LoL = [["fred", "barney"],
       ["george", "jane", "elroy"],
       ["homer", "marge", "bart"]]
LoLsave = LoL[:] # See comment below

printLoL('Families:', LoL)

In Python, you are always dealing with references to objects. If you just assign one variable to another, e.g.,

a = [1, 2, 3]
b = a

you have just made b refer to the same array as a. Changing the values in b will affect a.

Sometimes what you want is to make a copy of a list, so you can manipulate it without changing the original. In this case, you want to make a new list whose elements are copies of the elements of the original list. This is done with a full array slice --- the start of the range defaults to the beginning of the list and the end defaults to the end of the list, so

a = [1, 2, 3]
b = a[:]

makes a separate copy of a.

Note that this is not necessarily the same thing as a deep copy, since references in the original array will be shared with references in the new array:

a = [ [1, 2, 3], [4, 5, 6] ]
b = a[:]
b[0][0] = 999
print a[0][0]   # prints 999

You can make a deep copy using the copy module:

import copy

a = [[1, 2, 3], [4, 5, 6]]
b = copy.deepcopy(a)
b[0][0] = 999
print a[0][0]   # prints 1

Generation of a list of lists

Reading from a file line by line

open (F, "cookbook.data1");
@LoL = ();
while ( <F> ) {
    push @LoL, [ split ];
}

printLoL ("read from a file: ", \@LoL);

LoL = []
for line in open('cookbook.data1'):
    LoL.append(line[:-1].split())
printLoL('read from a file: ', LoL)

Unless you expect to be reading huge files, or want feeback as you read the file, it is easier to slurp the file in in one go.

In Perl, reading from a file-handle, e.g., <STDIN>, has a context-dependent effect. If the handle is read from in a scalar context, like $a = <STDIN>;, one line is read. If it is read in a list context, like @a = <STDIN>;the whole file is read, and the call evaluates to a list of the lines in the file.

Reading from a file in one go

open (F, "cookbook.data1");

@LoL = map { chop; [split]; } <F>;

printLoL ("slurped from a file: ", \@LoL);

LoL = [line[:-1].split() for line in open('cookbook.data1')]
printLoL("slurped from a file: ", LoL)

Thanks to Adam Krolnik for help with the perl syntax here.

Filling a list of lists with function calls

for $i ( 0 .. 9 ) {
    $LoL[$i] = [ somefunc($i) ];
}
printLoL("filled with somefunc:", \@LoL);

LoL = [0] * 10  # populate the array -- see comment below

for i in range(10):
  LoL[i] = [ somefunc(i) ]

printLoL('filled with somefunc:', LoL)

Alternatively, you can use a list comprehension:

LoL = [somefunc(i) for i in range(10)]
printLoL('filled with somefunc:', LoL)

In python:

• You have to populate the matrix -- this doesn't happen automatically in Python.
• It doesn't matter what type the initial elements of the matrix are, as long as they exist.

Filling a list of lists with function calls, using temporaries

for $i ( 0 .. 9 ) {
    @tmp = somefunc($i);
    $LoL[$i] = [ @tmp ];
}

printLoL ("filled with somefunc via temps:", \@LoL);

for i in range(10):
    tmp = [ somefunc(i) ]
    LoL[i] = tmp

printLoL('filled with somefunc via temps:', LoL)

@LoL = map { [ somefunc($_) ] } 0..9;
printLoL ('filled with map', \@LoL);

LoL = map(lambda x: [ somefunc(x) ], range(10))
printLoL('filled with map', LoL)

Both Perl and Python allow you to map an operation over a list, or to loop through the list and apply the operation yourself.

I don't believe it is advisable to choose one of these techniques to the exclusion of the other --- there are times when looping is more understandable, and times when mapping is. If conceptually the idea you want to express is "do this to each element of the list", I would recommend mapping because it expresses this precisely. If you want more precise control of the flow during this process, particularly for debugging, use loops.

Tom Christiansen suggests that it is often better to make it clear that a function is being defined, by writing:

@LoL = map { [ somefunc($_) ] }, 0..9;

Rather than

@LoL = map ({[ somefunc($_) ]}, 0..9);

or

@LoL = map ( [ somefunc($_) ] , 0..9);

Adding to an existing row in a list of lists

@LoL = @LoLsave;  # start afresh
push @{ $LoL[0] }, "wilma", "betty";
printLoL ('after appending to first element:', \@LoL);

LoL = LoLsave[:]  # start afresh
LoL[0] += ["wilma", "betty"]
printLoL('after appending to first element:', LoL)

In python, the + operator is defined to mean concatenation for sequences. An alternative to the above code is to append each element of the list to LoL[0]:

LoL[0].append("wilma")
LoL[0].append("betty")

Accessing elements of a list of lists

One element

$LoL[0][0] = "Fred";
print ("first element is now $LoL[0][0]\n");
printSep();

LoL[0][0] = "Fred"
print 'first element is now', LoL[0][0]
printSep()

Another element

# upcase the first letter of each word
# s/(\w)/\u$1/ is equivalent to Python .capitalize()
$LoL[1][1] =~  s{\b([\w])}{\u$1}g;
print ("element 1, 1 is now $LoL[1][1]\n");
printSep();

LoL[1][1] = LoL[1][1].title()
print 'element 1, 1 is now', LoL[1][1]
printSep()

Perl's regexp matching and substitution is enormously powerful; see especially the new syntax for comments and whitespace inside regular expressions. Python replaced its original regular epression module some years ago with one that closely matches the capabilities of Perls, including being able to do advanced RE tasks such as calling a function to provide the data for an RE substitution, and the optional inclusion of whitespace and comments in REs.

In Python, string methods are often used where perl would use a regex. Among these string methods are title() and capitalize().

In the context of names, title() will be used as it correctly changes "smith-jones" to "Smith-Jones" whereas capitalize() would produce "Smith-jones".

str2 = str1.capitalize() in Python is equivalent to $str2 = ucfirst($str1) in Perl.

Python's str2 = str1.title() is equivalent to Perl's:

$str2 = $str1;
$str2 =~ s{\b([\w])}{\u$1}g;

This is because regular expression search and replace operations modify the string in place (Perl strings are mutable).

Printing a list of lists

Print a list of lists using references

for $aref ( @LoL ) {
    print "\t [ @$aref ],\n";
}
printSep();

for a in LoL:
    print "\t [ %s ]," % a
printSep()

[Need a pointer to the % operator]

Print a list of lists using indices

for $i ( 0 .. $#LoL ) {
    print "\t [ @{$LoL[$i]} ],\n";
}
printSep();

for i in range(len(LoL)):
  print "\t [ %s ]," % LoL[i]
printSep()

The highest valid index of an array A:

• Perl: $#A.

• Python: len(A) - 1.

But note: The highest valid upper bound to a python range is len(A) as in

A[0:len(A)]

Size of an array A:

• Perl: scalar(@A)

• Python: len(A)

Note: Perl does not really have a length operator like Python. scalar() simply provides a scalar context, and in a scalar context an array returns its size. (Perl is context-sensitive and things behave differently based on their context.)

Generate range of numbers:

• Perl: (0..9)

• Python: range(0, 10) or simply range(10) (assumes 0 as initial)

Note: Perl uses a closed interval, while Python uses a closed-open interval. You will notice that this pattern is quite consistently applied in both languages.

[Link to details of the range function]

Print a list of lists element by element

for $i ( 0 .. $#LoL ) {
    for $j ( 0 .. $#{$LoL[$i]} ) {
        print "elt $i $j is $LoL[$i][$j]\n";
    }
}
printSep();

for i, mylist in enumerate(LoL):
    for j, elem in enumerate(mylist):
        print 'elt %d %d is %s' % (i, j, elem)
printSep()

Print a list of lists using map

sub printLine { print (join (" ", @{shift()}), "\n"); }
map (printLine ($_), @LoL);
printSep();

# This is legal but Do Not Do This
def printLine(l):
    print " ".join(l)
map(printLine, LoL)
printSep()

Print a list of lists using map and anonymous functions

print map { join (' ', @$_), "\n" } @LoL;
printSep();

# This is legal but Do Not Do This
map(lambda x: sys.stdout.write(" ".join(x)), LoL)
printSep()

The lack of true lambda expressions in Python is not really a problem, since all it means is that you have to provide a name for the function. Since you can define a function within another function, this does not lead to namespace clutter.

In Perl, a function can be defined inside another function, but it is defined in the namespace of the current package. If you need Python-like scoping of functions, you can create an anonymous subroutine and assign it to a lexically scoped variable:

# A Python function with its own private function
def lolprint(LoL):
   # Private function
   def lprint(alist):
      print " ".join(str(alist))
   map(lprint, LoL)

# Achieving the same in Perl
sub lolprint {
   my @LoL = (@_);

   # Private function 
   # (function reference stored in a lexically scoped variable)
   my $lprint = sub {
      my $list = shift;
      print join(" ", (@{$list}) );
   };

   map { $lprint->($_) } (@LoL);
}

# In Perl, if you did this, the function is no longer private.
sub lolprint {
   my @LoL = (@_);
   
   # This is not a private function
   sub lprint {
      my $list = shift;
      print join(" ", (@{$list}) );
   };

   map { lprint($_) } (@LoL);
}

Hashes/dictionaries of lists

The perl code in this section is taken, with permission, almost directly from Tom Christiansen's [http://www.perl.com/perl/pdsc/ Perl Data Structures Cookbook], part 2, release 0.1, with a few typos fixed.

Associative arrays are containers that hold pairs of elements. The first element of a pair is the key, the second is the value. In Python, the key may be of almost any type [(link to explanation of why lists can't be keys)]; I am not what the limitations are in Perl.

Associative arrays are sometimes called maps, dictionaries (Python, Smalltalk), or hashes (Perl).

Preliminaries

sub printSep {   print ("=" x 60, "\n"); }

sub printHoL
{
  my ($s, $hol) = @_;
  print ("$s\n");
  for $k (sort keys (%$hol))
  {
    my ($v) = $hol->{$k};
    print ("$k : ", join (" ", @$v), "\n")
  }
  printSep();
}

sub get_family{
  my ($group) = shift;
  $group =~ s/s$//;
  $group = "\u$group";
  return ("Mr-$group", "Mrs-$group", "$group-Jr");
  }

def printSep():
    print '=' * 60

def printHoL(s, hol):
    print s
    items = hol.items();
    items.sort()
    for key, value in items:
        print key, ':', " ".join(value)
    printSep()

def get_family(group):
  group = group.title()
  return ["Mr-" + group, "Mrs-" + group, group + "-Jr"]

printHoL pretty-prints a hash/dictionary of lists.

printSep prints a line of equal signs as a separator.

get_family makes a list of names from a "group name", e.g., flintstones becomes [ "Mr-Flintstone", "Mrs-Flintstone", "Flintstone-Jr" ] This is for generating lists to fill a hash/dictionary.

hol.items()` converts a dictionary to a list of (key, value) pairs, eg: [('flintstones', ['fred', 'barney']), ('jetsons', ['george', 'jane', 'elroy']), ('simpsons', ['homer', 'marge', 'bart'])] This list is then sorted (sorting is in-place in python) and then the pairs in the list are unpacked and used.

Declaration of a hash of lists

%HoL = (
       flintstones        => [ "fred", "barney" ],
       jetsons            => [ "george", "jane", "elroy" ],
       simpsons           => [ "homer", "marge", "bart" ],
     );

printHoL ('names', \%HoL);

HoL = { 'flintstones' : ['fred', 'barney'],
        'jetsons' : ['george', 'jane', 'elroy'],
        'simpsons': ['homer', 'marge', 'bart'], }

printHoL('names', HoL)

In python, the print statement has very good default semantics --- most of the time, it does exactly what you want, putting a space between the arguments, and a newline at the end. If you want more control over the formatting, use the % operator [link to % operator]: rather than

print k, ':', " ".join(v)

you could use

print "%s: %s" % (k, " ".join(v))

to avoid the space before the colon.

Note that both perl and python let you have a comma after the last element of a list. This is especially useful for automatically generated lists, where you don't want to have to worry about a special case at the end.

Larry Wall says:

• The Perl code can be written in a more Pythonesque way, and means pretty much the identical thing. Perl always uses scalar variables for references. Note the brackets rather than the parens to get an anonymous hash constructor.

$HoL = {
       flintstones        => [ "fred", "barney" ],
       jetsons            => [ "george", "jane", "elroy" ],
       simpsons           => [ "homer", "marge", "bart" ],

};
printHoL (\'names\', $HoL);

Note that since $HoL is already a ref, the \\ is no longer necessary.

Initializing hashes of lists

Initializing hashes of lists from a file

The file is assumed to consist of a sequence of lines of the form:

flintstones: fred barney wilma dino

%HoL = ();
open (F, "cookTest.2");
while ( <F> ) {
    next unless s/^(.*?):\s*//;
    $HoL{$1} = [ split ];
}
printHoL ('read from file cookTest.2', \%HoL);

HoL = {}
for line in open('cookTest.2'):
    try:
        surname, people = line.split(":", 1)
    except ValueError:             # can't split on ":" so no ":" in the line
        continue
    HoL[surname] = people.split()

printHoL('read from file cookTest.2', HoL)

Note that the perl hash is initialized with an empty list, not an empty hash reference ({ }). Writing

%HoL = {}

Reading into a hash of lists from a file with temporaries

# flintstones: fred barney wilma dino
open (F, "cookTest.3");
%HoL = {};
while ( $line = <F> ) {
    next unless $line =~ /:/;
    ($who, $rest) = split /:\s*/, $line, 2;
    @fields = split ' ', $rest;
    $HoL{$who} = [ @fields ];
}

printHoL ('read from cookTest.3', \%HoL);

HoL = {}
for line in open('cookTest.3'):
    try:
        n = line.index(":")
    except ValueError:         # ":" not found
        continue
    who, rest = line[:n], line[n+1:]  # n+1 skips the colon
    fields = rest.split()
    HoL[who] = fields

printHoL ('read from cookTest.3', HoL)

Initializing a hash of lists from function calls

For each key of the hash, we call a function that creates a list, and associate the key with this list.

%HoL = {};
for $group ( "simpsons", "jetsons", "flintstones" ) {
    $HoL{$group} = [ get_family($group) ];
}

printHoL ('filled by get_family', \%HoL);

HoL = {}
for group in ("simpsons", "jetsons", "flintstones"):
    HoL[group] = get_family(group)

printHoL ('filled by get_family', HoL)

The python section could [but should NOT] have been written:

HoL={}
def set(group, hol=HoL):
    hol[group] = get_family(group)
map(set, ("simpsons", "jetsons", "flintstones" ))

printHoL ('filled by get_family', HoL)

The perl section could have been written:

%Hol = {};
map { $HoL{$_} = [ get_family($_) ] } "simpsons", "jetsons", "flintstones";

Initializing a hash of lists from function calls with temporaries

For each key of the hash, we call a function that creates a list, and associate the key with this list. The list is assigned to a local variable (where it could be modified, for example).

%LoL = {};
for $group ( "simpsons", "jetsons", "flintstones" ) {
    @members = get_family($group);
    $HoL{$group} = [ @members ];
}

printHoL ('by get_family with temps', \%HoL);

LoL = {}
for group in ("simpsons", "jetsons", "flintstones"):
    members = get_family(group)
    HoL[group] = members

printHoL ('by get_family with temps', HoL)

Append to a list in a hash of lists

We want to add two strings to the list of strings indexed by the name flintstones.

push @{ $HoL{flintstones} }, "wilma", "betty";
print (join (" ", @{$HoL{flintstones}}), "\n");
printSep();

HoL['flintstones'] += ['wilma', 'betty']
print " ".join(HoL['flintstones'])
printSep()

Tom Christiansen says: while it's not a great efficiency, it works to say

$HoL{'flintstones'} = [ @{ $HoL{'flintstones'} }, "wilma", "betty" ];

Access elements of a hash of lists

Access a single element

Assign to the first element of the list indexed by flintstones.

$HoL{flintstones}[0] = "Fred";
print ($HoL{flintstones}[0], "\n");
printSep();

HoL['flintstones'][0] = "Fred"
print HoL['flintstones'][0]
printSep()

Tom Christiansen explains when you don't need quotes around strings in perl:

• It's whenever you have a bareword (identifier token) in braces. Thus

  ${blah} and $something{blah} don't need quotes.

If blah were a function then you would have to use $something{blah()} to overwrite the stringificiation. Barewords are autoquoted in braces and as the LHS operand of =&rt; as well.

Change a single element

This upcases the first letter in the second element of the array indexed by simpsons.

# another element

$HoL{simpsons}[1] =~ s/(\w)/\u$1/;

printHoL ('after modifying an element', \%HoL);

HoL['simpsons'][1] = HoL['simpsons'][1].title()

printHoL ('after modifying an element', HoL)

Print a hash of lists

Various different ways of printing it out.

Simple print

Printed sorted by family name, in the format:

family1: member1-1 member1-2...
family2: member2-1 member2-2...
...

foreach $family ( sort keys %HoL ) {
    print "$family: @{ $HoL{$family} }\n";
}
printSep();

families = HoL.items();
families.sort()
for surname, members in families:
    print '%s: %s' % (surname, " ".join(members))
printSep()

Print with indices

foreach $family ( sort keys %HoL ) {
    print "family: ";
    foreach $i ( 0 .. $#{ $HoL{$family}} ) {
        print " $i = $HoL{$family}[$i]";
    }
    print "\n";
}
printSep();

k = HoL.keys();
k.sort()
for surname in k:
    print 'surname: ',
    for (i, member) in enumerate(HoL[surname]):
        print '%d = %s' % (i, member),
    print
printSep()

Print sorted by number of members

push (@{$HoL{'simpsons'}}, 'Lisa');
foreach $family ( sort { @{$HoL{$b}} <=> @{$HoL{$a}} } keys %HoL ) {
    print "$family: @{ $HoL{$family} }\n"
}

HoL['simpsons'] += ['Lisa']

def cmpNumberMembers(a,b):
  return cmp(len(a[1]), len(b[1]))

families = HoL.items()
families.sort(cmpNumberMembers)
for surname, members in families:
    print "%s:" % surname, " ".join(members)

You can use a lambda expression in python here, too, though I don't find it very readable:

HoL['simpsons'] += ['Lisa']
families = HoL.items()
families.sort(lambda a, b: cmp(len(a[1]), len(b[1])))
for surname, members in k:
    print "%s:" % surname, " ".join(members))

Print sorted by number of members, and by name within each list

foreach $family ( sort { @{$HoL{$b}} <=> @{$HoL{$a}} } keys %HoL ) {
    print "$family: ", join(", ", sort @{ $HoL{$family}}), "\n";
}

families = HoL.items()
families.sort(lambda a, b: cmp(len(a[1]), len(b[1])))
for surname, members in families:
    members.sort()
    print "%s: %s" % (family, ", ".join(members))

Lists of hashes/dictionaries

The perl code in this section is taken, with permission, almost directly from Tom Christiansen's [http://www.perl.com/perl/pdsc/ Perl Data Structures Cookbook], part 3, release 0.1, with a few typos fixed.

Lists of hashes: preliminaries

sub printSep {   print ("=" x 60, "\n"); }

sub printLoH
{
  my ($s, $loh) = @_;
  print ("$s\n");
  for $h (@$loh)
  {
    print ("[\n");
    for $k (sort (keys %$h))
    {
      print ("  $k => $h->{$k}\n");
    }
    print ("]\n");
  }
  printSep();
}

import sys

def printSep():
    print '=' * 60

def printLoH(s,loh):
    print s
    for h in loh:
        print "["
        items = h.items()
        items.sort()
        for key, val in items:
            print '  %s => %s' % (key, val)
        print "]"
    printSep()

The only reason I sort the keys here is to make sure that python and perl print the elements of the dictionary in the same order.

Note that sorting in perl generates a new list, while in python sorting is done in-place. This means that you can avoid making a copy while sorting in python. The disadvantage is a clumsier syntax for the common case where you do want a copy. Larry Wall says that in Perl, you almost always do want the copy; I am not sure whether this is true in Python.

Declaration of a list of hashes

@LoH = (
       {
          Lead      => "fred",
          Friend    => "barney",
       },
       {
           Lead     => "george",
           Wife     => "jane",
           Son      => "elroy",
       },
       {
           Lead     => "homer",
           Wife     => "marge",
           Son      => "bart",
       }
 );

printLoH ('initial value', \@LoH);

LoH = [
       {  "Lead"      : "fred",
          "Friend"    : "barney"
       },
       {
           "Lead"     : "george",
           "Wife"     : "jane",
           "Son"      : "elroy"
       },
       {
           "Lead"     : "homer",
           "Wife"     : "marge",
           "Son"      : "bart"
       }
      ]

printLoH ('initial value', LoH)

Generation of a list of hashes

Reading a list of hashes from a file

The format of the file is expected to be:

LEAD=fred FRIEND=barney
LEAD=homer WIFE=marge
...

@LoH = ();
open (F, "cooktest.4");
while ( <F> ) {
    my ($rec) = {};
    for $field ( split ) {
        ($key, $value) = split /=/, $field;
        $rec->{$key} = $value;
    }
    push @LoH, $rec;
}

printLoH ('after reading from file cooktest.4', LoH);

LoH = []
for line in open("cooktest.4")
    rec = {}
    for field in line.split():
        key, value = field.split('=', 1)
        rec[key] = value
    LoH.append (rec)

printLoH ('after reading from file cooktest.4', LoH)

Reading a list of hashes from a file without temporaries

@LoH = ();
open (F, "cooktest.4");
while ( <F> ) {
    push @LoH, { split /[\s=]+/ };
}

printLoH ('direct read from file', \@LoH);

# This builds a list of (key, value) pairs, and then creates the
# dictionary from those.  A temporary pairs is used for readability
LoH = []
for line in open("cooktest.4")
    pairs = [field.split("=", 1) for field in line.split()]
    LoH.append(dict(pairs))

printLoH ('direct read from file', LoH)

If you really want no temporaries at all, you could (but shouldn't) use the one line list comprehension (line breaks for legibility):

LoH = [dict([field.split("=", 1)
             for field in line.split()])
                 for line in open("cooktest.4")]

printLoH ('direct read from file', LoH)

Generation of a list of hashes from function calls

Preliminaries

For convenience, these functions and variables are global. getnextpairset returns the elements of the array _getnextpairsetdata. I don't know why Tom chose to make this return a list in perl, rather than a reference to a hash. In python, returning a dictionary is definitely the way to go.

$_getnextpairsetcounter = 0;
@_getnextpairsetdata =
  ( ["lead", "fred", "daughter", "pebbles"],
    ["lead", "kirk", "first_officer", "spock", "doc", "mccoy"]);

sub getnextpairset{
  if ($_getnextpairsetcounter > $#_getnextpairsetdata) { return (); }
  return @{$_getnextpairsetdata[$_getnextpairsetcounter++]};
}

sub parsepairs{
my ($line) = shift;
chop ($line);
return split (/[= ]/, $line);
}

_getnextpairsetcounter = 0
_getnextpairsetdata =\
  [ {"lead" : "fred", "daughter" : "pebbles"},
    {"lead" : "kirk", "first_officer" : "spock", "doc" : "mccoy"} ]

def getnextpairset():
  global _getnextpairsetcounter
  if _getnextpairsetcounter == len(_getnextpairsetdata) : return ''
  result = _getnextpairsetdata[_getnextpairsetcounter]
  _getnextpairsetcounter = _getnextpairsetcounter + 1
  return result

def parsepairs(line):
  line = line[:-1]   # chop last character off
  dict = {}
  pairs = regsub.split (line, "[= ]")
  for i in range(0, len(pairs), 2):
    dict[pairs[i]] = pairs[i+1]
  return dict

getnextpairset: Note the unwieldiness in python due to the fact that it does not have increment operators.

This would be much more elegant as a class, both in python and perl. [add a pointer to classes when we get there]

Generation

Call a function returning a list (in perl) or a dictionary (in python). In perl, the list is of the form ("lead","fred","daughter","pebbles"); in python, the dictionary is of the form {"lead" : "fred", "daughter" : "pebbles"}.

# calling a function  that returns a key,value list, like

@LoH = ();
while ( %fields = getnextpairset() ) {
   push @LoH, { %fields };
}
printLoH ('filled with getnextpairset', \@LoH);

LoH = []
while 1:
  fields = getnextpairset()
  if not fields: break
  LoH.append (fields)

printLoH ('filled with getnextpairset', LoH)

Generation without temporaries

@LoH = ();
open (F, "cooktest.4");
while (<F>) {
        push @LoH, { parsepairs($_) };
    }

printLoH ('generated from function calls with no temps', \@LoH);

LoH = [parsepairs(line) for line in open("cooktest.4")]

printLoH ('generated from function calls with no temps', LoH)

Adding a key/value pair to an element

$LoH[0]{"PET"} = "dino";
$LoH[2]{"PET"} = "santa's little helper";

printLoH ('after addition of key/value pairs', \@LoH);

LoH[0]["PET"] = "dino"
LoH[2]["PET"] = "santa's little helper"

printLoH ('after addition of key/value pairs', LoH)

Accessing elements of a list of hashes

$LoH[0]{LEAD} = "fred";
print ("$LoH[0]{LEAD}\n");

$LoH[1]{LEAD} =~ s/(\w)/\u$1/;
print ("$LoH[1]{LEAD}\n");

printSep();

LoH[0]["LEAD"] = "fred"
print (LoH[0]["LEAD"])

LoH[1]["LEAD"] = LoH[1]["LEAD"].title()
print (LoH[1]["LEAD"])

printSep()

Printing a list of hashes

Simple print

for $href ( @LoH ) {
    print "{ ";
    for $role ( sort keys %$href ) {
        print "$role=$href->{$role} ";
    }
    print "}\n";
}

for href in LoH:
    print "{",
    items = href.items();
    items.sort()
    for role, val in items:
        print "%s=%s" %(role, val),
    print "}"

Note the comma after the print in the python segment -- this means "don't add a newline".

Print with indices

for $i ( 0 .. $#LoH ) {
    print "$i is { ";
    for $role ( sort keys %{ $LoH[$i] } ) {
        print "$role=$LoH[$i]{$role} ";
    }
    print "}\n";
}

for i, elem in enumerate(LoH):
    print i, "is {",
    items = elem.items();
    items.sort()
    for role, val in items:
        print "%s=%s" % (role, val),
    print "}"

Note the comma after the print in the python segment -- this means "don't add a newline". It does, however, add a space.

Print whole thing one at a time

for $i ( 0 .. $#LoH ) {
    for $role ( sort keys %{ $LoH[$i] } ) {
        print "elt $i $role is $LoH[$i]{$role}\n";
    }
}

for i, elem in enumerate(LoH):
    items = elem.items();
    items.sort()
    for role, val in items:
        print "elt", i, role, "is", val

Interface to the Tk GUI toolkit

The perl versions of this code have not been tested, as we don't currently have a working version of perl and tk.

[Links to tkinter doc]

[Links to perl/tk doc (is there any yet?)]

Preliminaries

All the following code snippets will need these declarations first:

use Tk;

from Tkinter import *
import sys

Hello world label

$top = MainWindow->new;
$hello = $top->Button('-text' => 'Hello, world',
                      '-command' => sub {print STDOUT "Hello, world\n";exit;});
$hello->pack;
MainLoop;

top = Tk()
def buttonFunction () :
    print 'Hello, world'
    sys.exit (-1)

hello = Button(top, {'text' : 'Hello, world', 'command' : buttonFunction})
hello.pack()
top.mainloop()

clear